Energy bills keep going up every month?
Attic insulation might be the fix you need — Kenwood, OH.
Your heating and cooling costs climb higher each season. The house feels drafty in winter and stuffy in summer, even with the thermostat running constantly. Most Kenwood homes lose the majority of their heated and cooled air through poorly insulated attics.
When your energy bills keep rising, the problem is usually your attic. Heat rises in winter and escapes through your roof. In summer, hot air pushes down through thin insulation. Your HVAC system works overtime to compensate, driving up costs month after month.
Adding blown-in attic insulation typically costs between $1,500 and $3,500 for most Kenwood homes. The work takes one day. Larger homes or attics with air sealing needs cost more. Homes built before 1980 often have the thinnest insulation and see the biggest savings.
Check your attic insulation level first. If you can see your ceiling joists, you need more. Current building standards require R-38 to R-49 for this climate zone. Central Insulation Systems can evaluate your attic and add blown-in fiberglass to meet those requirements. Most homeowners schedule the work before peak heating or cooling season.
Once your attic meets current insulation standards, your energy bills stabilize. Your house feels more comfortable year-round. The HVAC system runs less often and lasts longer.
What people in Kenwood say
"THEY DID A GOOD JOB AND I THOUGHT THE PRICE WAS REASONABLE."
"I worked with Kevin Con, their field specialist. Kevin talked to me over the phone for quite awhile to make sure that I had a good estimate and knowledge of the procedure. The team came out early and they were efficient in the processes. I would highly recommend them especially because they worked so closely with our roofing team to get the job done in one day."
"I am just so happy. They came out on a Tuesday (the owner Steve and his son) and took a look and had a crew of 2 out for me the next day! They got there at 8:30 am and all was completed by 2:00. The follow up was excellent. I could just go on and on. I am very impressed and want to insulate everything NOW because they were so excellent!"
Other things people in Kenwood ask
house cold high energy bills insulation
Check your attic insulation first. Most heat loss happens through the roof. If you can see floor joists through the insulation, you need more. R-38 to R-60 blown insulation typically pays for itself in 2-3 years.
blown in attic insulation cost
Blown-in fiberglass costs $1.50-3.00 per square foot installed. Price depends on R-value needed and attic access. For a 1200 sq ft attic, expect $1800-3600 total. Cheaper quotes often mean lower R-value.
attic insulation contaminated with rodent droppings
Don't try to clean contaminated insulation yourself. Rodent waste carries serious diseases like hantavirus. The safest approach is complete removal, sanitization of the attic space, and fresh insulation installation to current R-value codes.
when to remove old insulation before adding new
Remove old insulation if it's damaged by water, contaminated by pests, or contains asbestos. If it's clean and dry, you can usually add new insulation on top. Get the old material tested first if your house was built before 1980.
attic insulation removal cost
Costs vary depending on the cause and how much insulation is affected, but most jobs require full removal and sanitation before re-insulation. Removal runs $1–2 per sq ft, and replacement adds another $1.50–4 per sq ft depending on insulation type. For a typical 1,000–1,500 sq ft attic, expect to pay $3,000–$10,000 or more when sanitation is involved. Pest or fire damage usually means the most thorough cleanup. Call us for a free estimate — we'll walk you through exactly what your attic needs.
Ready to talk?
Central Insulation Systems handles attic insulation in Kenwood and the area around it.