House freezing and energy bills doubled in Fort Mitchell?
Your attic insulation might be the problem. Here's how blown in insulation can fix it.
Your heating bill jumped this winter and some rooms stay cold no matter how high you turn the thermostat. Fort Mitchell homes built before 2000 often have thin attic insulation that settles over time, letting heat escape through the roof.
When you can see your attic floor joists through the insulation, most of your heated air is escaping upward. Old insulation compresses and creates gaps where cold air sneaks in. The result is higher bills and cold spots throughout your house.
Blown in attic insulation typically costs $1.50 to $3.50 per square foot installed. For a typical Fort Mitchell home, that's usually $2,000 to $4,500 depending on your attic size and current insulation level. The work takes one day and includes air sealing around pipes and fixtures.
Check your attic first. If you see floor joists, you need more insulation. Look for R-38 to R-60 coverage, which means 12 to 18 inches of blown material. Central Insulation Systems Inc. can assess your current situation and install Owens Corning Atticat Pink fiberglass insulation that fills every gap and corner.
Once installed, your house stays warmer with less furnace runtime. Most homeowners see their heating bills drop 20 to 40 percent within the first winter. Cold rooms warm up and stay comfortable.
What people in Fort Mitchell say
"THEY DID A GOOD JOB AND I THOUGHT THE PRICE WAS REASONABLE."
"I worked with Kevin Con, their field specialist. Kevin talked to me over the phone for quite awhile to make sure that I had a good estimate and knowledge of the procedure. The team came out early and they were efficient in the processes. I would highly recommend them especially because they worked so closely with our roofing team to get the job done in one day."
"I am just so happy. They came out on a Tuesday (the owner Steve and his son) and took a look and had a crew of 2 out for me the next day! They got there at 8:30 am and all was completed by 2:00. The follow up was excellent. I could just go on and on. I am very impressed and want to insulate everything NOW because they were so excellent!"
Other things people in Fort Mitchell ask
asbestos floor tiles removal
Stop all work immediately. Do not sand, scrape, or break the tiles. Get a sample tested by a certified lab first. If it tests positive, hire a licensed asbestos abatement contractor. DIY removal is illegal in most areas and dangerous.
asbestos pipe insulation basement boiler
Stop going in that area immediately. Do not touch or disturb the insulation. Crumbling asbestos pipe insulation releases dangerous fibers. Get it tested professionally. The 2 options are to have it covered with special encapsulating material or have it removed by a licensed abatement contractor.
blown in attic insulation cost
Blown-in fiberglass costs $1.50-3.00 per square foot installed. Price depends on R-value needed and attic access. For a 1200 sq ft attic, expect $1800-3600 total. Cheaper quotes often mean lower R-value.
how much does asbestos removal cost
Asbestos removal cost depends on square footage, material type, and access difficulty. Pipe insulation runs $15-25 per linear foot. Floor tiles cost $5-15 per square foot. Get three licensed quotes and compare line items, not just total price.
can I remove asbestos myself DIY
No. DIY asbestos removal is illegal in most states and extremely dangerous. You need special licenses, containment equipment, and disposal permits. One mistake can contaminate your entire house and put your family at risk.
Ready to talk?
Central Insulation Systems sells blown in insulation for Fort Mitchell and the area around it.